Jetec 8 Pieces 2 Inch Metal Hold Down Brackets and Pins, Blind Holder Replacements for Horizontal Blinds Shades Windows Doors

4 Pieces 2 inch metal hold down brackets and 4 pieces pins, blind brackets blind holder replacements for horizontal blinds shades windows doors Proper ans simple appearance: These metal hold down brackets are simple in design, small in size, thus, they are difficult to be noticed. Using them to hold down most blinds will not affect the overall appearance of the blinds, and you can enjoy the beautiful scenery from the windows as well. Installation procedures: 1 What you need: drill, screwdriver, tape measure, hammer, pencil. 2 If the bottom rail is not fitted with pins, drill a approx. 1/2 inch deep 7/64 inch or 3/32 inch bit in the center to hold pins on both sides of the rail. 3 Punch the pins in. 4 Put the blind plate down, put the bottom rail flat in place, and mark the position of the fixed bracket with a pencil. 5 Screw the bracket to the door. 6 Measure the position of the bracket now screwed to the door and mark on the other side. 7 Then repeat the above steps to install the second bracket. Specification: Material: metal Package includes: 4 x Hold down brackets 4 x Pin bolts Warm notice: Slight size errors may exist due to manual measurement. To avoid choking hazard, please keep the products away from kids under the age of 3.

• Metal
• Package contents: the package includes 4 pieces of separate brackets and 4 pieces of pin bolts, a total of 8 pieces of parts; They can meet your daily use and replacement, suitable for blind installation
• Durable material: these metal hold down brackets are made of reliable metal materials, strong, durable and lightweight, easy to install and less likely to deform or break; They are suitable for most blinds or windows and can serve you for a long time
• Appropriate size: the size of each metal hold down bracket is about 2 inches, which is suitable for most blinds and does not take up too much space; Before ordering, please check the size carefully and make sure they can match your windows or blinds
• Simple design: blind hold down brackets are simple in design, small in size, thus, they are difficult to be noticed; Using them to hold down most blinds will not affect the overall appearance of the blinds, and you can enjoy the beautiful scenery from the windows as well
• Easy to apply: the installation and application of these tools are rather easy and convenient; Firstly, you put the pins into the holes of the brackets, and then reinforce them and you can successfully apply them; For more details, please refer to the installation steps below